Push bar panic device installation tutorial for fire doors

Hello friends! All those special bars on doors you can push to quickly open them on your way out. The bars are called push bar panic devices, and they play a huge role in keeping everyone safe, particularly in an emergency situation (such as a fire). For a fire door these fire exit door with panic bar and push bars are the first thing we're going to look at how to fit. We will also discuss how to do so safely and easily so you can help keep your building safer for all of us.

Simple and Effective

We are now ready to finally install the pushbar device! There's nothing worse than starting a project only to find out that you are missing some key tool you are going to need. That includes screws, and a drill and screwdriver. It will help the process go smoothly if you have everything ready.

Mount the modern style sliding barn door and push bar device on the door, carefully aligning it with the marks you made earlier. The push bar is located properly so that it works properly

Drilling some small holes where the screw positions you marked. You want the holes to be a little smaller than the screws you plan on using. This matters because if the holes are excessive, the screws don’t get proper purchase, and the thing could detach. Next, get your mounting screws and place them through the mounting holes on your push bar device. Then screw them into the door using the screwdriver.

How to Install Push Bar Panic Devices?

A level is a tool that you can use to ensure that the push bar device is mounted straight and secure. It's just a simple horizontal member that helps you know whether something, straight. If the push bar is not horizontal, loosen the screws a little bit. Next, Stretch Push Bar device so that it is straight. Once it looks good, tighten the screws back again so it sticks in place.

A Comprehensive Tutorial

That's all we could cover for today on installing push bar panic devices on fire doors! This is a critical step in ensuring your safety and the safety of others in an emergency. Before testing, just make sure, especially, before you start, that it is a fire door, (and) make sure of the strength and thickness of your door. Be sure to measure before you head out to get the right size of push bar device. By following these steps carefully, you should be able to install the push bar independently and do so safely and easily.

Finally, XZIC is a proud supplier of quality slide barn wood door door and push bar panic hardware for your fire doors. Contact Us to engage your concerns if need assistance on the installation or for any queries.